Erecovery can not be installed 1 bootable file что делать

Fixed: Acer eRecovery Management Cannot Install Bootable File

Solutions for Acer eRecovery Management problem — Acer eRecovery Management cannot install bootable file.

By Delia / Updated on October 18, 2022

Share this:
Table of Contents

1. Overview of Acer eRecovery Management
2. Case 1: Can’t install Acer eRecovery Management in Windows
3. Case 2: Can’t install Acer eRecovery Management in Safe Mode
4. Case 3: Can’t install Acer eRecovery Management after deleting recovery partition
5. Best Acer eRecovery Management Alternative

Overview of Acer eRecovery Management

Acer eRecovery Management is a lightweight backup and recovery tool that can help Acer laptop users safeguard their personal and work data from unintentional loss or hardware failures, etc. You can also use it to restore Acer computers to factory default settings as necessary.

Decent as it seems, you may encounter Acer eRecovery Management errors sometimes. The problem that Acer eRecovery Management can’t install bootable file is one of the common issues. Other issues like “Acer eRecovery hard drive configuration is not set” are also reported.

This page will show you how to fix Acer eRecovery can not be installed under different conditions. Pick one solution according to your situation.

Case 1: Can’t install Acer eRecovery Management in Windows

Symptom

I Want To Install Acer eRecovery Management On My Windows 7 professional Netbook but It Fail. It Say: eRecovery Can Not Be Installed 1. Bootable Files.

Solution

When Acer Recovery Manager cannot install bootable file, if you want to make a system recovery image, just make use of Windows System Recovery under control panel.

Step 1. Enter “recovery drive” in the search box, and then choose “Create a recovery drive”.

Step 2. In the next screen, ensure that the “Copy the recovery partition from the PC to the recovery drive” box is checked.

Step 3. Plug in a USB flash drive which is large enough to contain the image file and select it as your recovery drive.

Step 4. Click “Create”. The recovery image and necessary recovery tools will be copied to your USB flash drive, which will take a while, depending on your PC and the size of the recovery image.

Step 5. When it finishes, remove the USB flash drive. Keep it in a safe place and don’t use it to store other files or data.

Case 2: Can’t install Acer eRecovery Management in Safe Mode

Symptom

I am using an acer aspire 5517 (32-bit) laptop. It has ALOT of viruses and trojans. It is very bad. I get black screen with blue screen in middle. Words are in white something about BIOS not working and crash? I cannot log in normal screen, I must use Safe Mode. (Screen still happens just less.) I try to factory reset but I do not have a disk, USB drive, or money to buy. I try press Alt+F10 on start up and get «Edit Boot Option». Installed Acer eRecovery on website but keep getting this «acer erecovery management cannot install bootable file». I also tried to erase alot of data (documents, pictures, stuff of the sort) and uninstall unneeded programs hope it was data limit. Did not work.

Solution

When Acer eRecovery Management can’t install bootable file, if you have to reset os to factory defaults, you can press F8 like when you go into safe mode. If you get an option to repair your computer, you should be able to factory reset from there. If not, you may need to buy the recovery cd’s from Acer.

If the factory recovery partition (OEM) is intact, the problem, Acer Recovery Manager cannot install bootable file, may be caused due to “Hard Disk Recovery” is not enabled. Press “F2” when restart to enter BIOS to check. If not, enable it. Then, restart the pc and press “ALT + F10” to begin system recovery process.

Case 3: Can’t install Acer eRecovery Management after deleting recovery partition

Symptom

I have an Aspire 6920 running its original vista x64.
I created the recovery disks (3 DVDs) through the eRecovery management when I first purchased the computer, and got rid of the recovery partition soon after. (I wanted the extra disk space =P)
I’ve recently decided to send my computer back to its factory default state, only to realize my eRecovery Management installation is no longer functional. I tried reinstalling it, resulting in an error message:
eRecovery can not be installed — 1.Bootable File
I went over the trouble of uninstalling and reinstalling the entire Acer Empowering Technology software pack, and all but eRecovery was able to install properly.

Solution

If you have changed the partition layout after you buy your machine, you should reformat the hard drive making two partitions and try again. Basically, for 100% success Acer Recovery Manager cannot install bootable file, it must be repartitioned as when it came from factory.

Best Acer eRecovery Management Alternative

There is a solution to all the cases above about Acer eRecovery Management cannot install bootable file; that is, to make use of the alternative of Acer eRecovery Management – AOMEI OneKey Recovery. AOMEI OneKey Recovery is a third party software aiming at system backup and recovery, especially for making a system image and quickly restoring corrupted system to a good condition.

When you can’t install Acer eRecovery Management and you want to create an OS image, you can use “OneKey System Backup” to achieve this. Once your computer fails to boot into Windows, you can immediately restore operating system from backup image file with “OneKey System Recovery”.

Just download AOMEI OneKey Recovery to have a try right now!

Secure Download

Delia owns extensive experience in writing technology-related blog posts, and has been a part of AOMEI since 2020 to provide expertise in data security and disaster recovery. She works with Windows operating systems, SQL databases, and virtualization platforms such as VMware and Hyper-V, specializing in troubleshooting and advising on data protection and migration.

Related Articles

Acer eRecovery Management Not Working – How to Solve It Easily?

If you encounter the problem of Acer eRecovery Management not working, read this article carefully to get effective solutions.

Acer eRecovery Management Missing Fixed [2 Ways]

How to fix Acer eRecovery Management missing problem in Windows 7, 8, 10? This essay will fix acer erecovery management is missing problem with 2 simple solutions.

Acer eRecovery Management Stuck Solutions

You will learn how to fix Acer eRecovery Management stuck problem in common situations and easily factory reset Acer without losing data.

FAQ по Acer eRecovery

1. Наличие в системе скрытого раздела. Для этого достаточно зайти в меню «управление» по клику правой кнопкой мыши на значке «мой компьютер» и выбрать меню «управление дисками». Если у Вас предустановлена Windows XP, то Вы увидите первый раздел с меткой «PQService» (конфигурация «EISA») размером от 2.5 до 5 Гб. Если у Вас предустановленная система — Windows Vista, то, как правило, первый раздел виден без метки (также конфигурация «EISA») и имеет размер от 9 Гб и больше. В случае отсутствия такого раздела — Вам следует искать решение своей проблемы в темах по восстановлению/создания скрытого раздела.

2. Наличие в системе работоспособного скрытого раздела. Иногда бывает так, что пользователь при установке операционной системы случайно или преднамеренно удалил первый (скрытый) раздел и не убрал в биосе функцию «D2D Recovery — enable». В этом случае, при установке оригинальной mbr от Acer, создается пустой скрытый раздел или первый раздел, куда пользователь установил операционную систему, помечается как скрытый и неактивный (конфигурация «EISA»). В последнем случае, естественно, операционная система не будет загружена, так как компьютер будет пытаться загрузиться со второго раздела. Лишь нажатие hot keys «Alt-F10» запустит первый раздел и, соответственно, установленную операционную систему. Следовательно, Вам необходимо проверить содержимое скрытого раздела. Сделать это совсем несложно при помощи программы mbrwrwin.exe (командой в командной строке mbrwrwin mount hd0:1 X:). Эта программа позволяет монтировать скрытый раздел (присваивает ему букву диска), и его содержимое можно посмотреть в проводнике. Если Вы испытываете трудность в монтировании, то можно воспользоваться этой программой pq.exe Особенность работы программы в среде Windows Vista: при запуске «от имени администратора» скрытый раздел будет виден только в командной строке, в проводнике его не увидите. Для просмотра содержимого используется команда dir X: (X: — буква смонтированного раздела, может быть любая, например, для вышеуказанной программы диску присваивается буква N:). Если Вы просто запускаете программу (от имени текущего пользователя), то скрытый раздел будет виден в проводнике, но с файлами ничего сделать не сможете, только просмотреть содержимое. В случае нерабочего скрытого раздела (пустой или там находится установленная Вами операционная система), Вам также, как указано выше, следует искать решение своей проблемы в темах по восстановлению/создания скрытого раздела. После перезагрузки компьютера раздел PQService снова станет скрытым.

3. Достаточно свободного места на системном разделе (разделе, куда восстанавливается/устанавливается ОС). Для Windows Vista и Windows 7 требуется раздел объемом не менее 30-35 Гб соответственно. При недостаточном количестве свободного места, могут возникнуть проблемы использования дисков восстановления.

Итак, если у Вас есть скрытый раздел и Вы испытываете проблемы с его использованием, то внимательно прочтите ответы на часто задаваемые вопросы и только в случае отсутствия нужного Вам решения, задавайте свой вопрос в теме.

Вопрос: Как запустить восстановление системы со скрытого раздела?
Ответ: Одновременным нажатием клавиш Alt и F10 при загрузке компьютера (в момент появления логотипа Acer). Совет: удерживайте нажатой клавишу Alt и многократно нажимайте F10. Получается не всегда с первого раза, так что пробуйте несколько раз.

Вопрос: Сочетание клавиш «Alt+F10» не работает. Как быть?
Ответ: В подавляющем большинстве случаев — установлена не оригинальная mbr (от Acer). Используйте этот патч mbr.exe , чтобы исправить ситуацию (в среде Windows Vista запускайте «от имени администратора» по правой кнопке мыши).

Вопрос: Скрытый раздел (eRecovery management) запустился, но для восстановления системы программа требует пароль.
Ответ: В системе восстановления по умолчанию установлен пароль шесть нулей (000000). Иногда — AIM1R8. Для того, чтобы его изменить/удалить, необходимо сделать соответствующие изменения в приложении Empowering Technology или в файле aimdrs.dat, находящемуся в скрытом разделе (как его смонтировать/открыть — см. выше). Файл aimdrs.dat можно отредактировать в блокноте (пароль указан в явном виде) или удалить, тогда пароль в дальнейшем запрашиваться не будет.

Вопрос:При запуске «восстановления заводской конфигурации» появляется ошибка «FAIL to get Disk 0 partition 3 drive letter»
Ответ: Ошибка при назначении буквы разделу, связана с некорректной операцией над разделами. Запустите консоль восстановления eRecovery (по Alt-F10) и нажмите Alt-Home, появится командная строка. Если это сделать не получаеся, используйте загрузочный диск с Вистой или Windows 7. Загрузите компьютер с диска и выберите пункты «восстановление-командная строка». В командной строке введите:

diskpart
sel disk 0
list part

В появившемся списке посмотрите, есть ли в наличии 3-й раздел (Partition 3), относится ли он к разделу с данными (обычно диск D). Если раздел на месте и является основным (primary), то попробуйте назначить букву разделу командой:

sel part 3
assign letter=E
exit

После перезагрузки диск Е станет диском D, а восстановление пройдет обычным способом. Если диск не отформатирован, то выполните:

sel part 3
format quick label=DATA
assign letter=E

Вопрос: При установке приложения eRecovery система сообщает об ошибке «Not D2D System. eRecovery can not be installed. «
Ответ:
1. Отсутствует скрытый раздел.
2. Попытка установки неверной версии eRecovery. Для уточнения нужной Вам версии, откройте в блокноте файл napp.dat, расположенный в скрытом разделе (как его открыть/смонтировать — см. выше). Итак:

NAPP 1.x.x или NAPP 3.2.x.x — eRecovery версии 1.2.х.х (образ создан с помощью программы GHOST)
NAPP 3.3.x.x — eRecovery версии 1.3.х.х (здесь и далее образ создан с помощью программы WASAY ImageIT разных версий, расширение *.wsi)
NAPP 4.0.x.x — eRecovery версии 2.0.x.x
NAPP 5.x.x.x — eRecovery версии 2.5.х.х (эта версия и выше используется для предустановленной Windows Vista)
NAPP 6.x.x.x — eRecovery версии 3.0.х.х

Вопрос: При установке приложения eRecovery система сообщает об ошибке «Old NAPP Version. «
Ответ: Устанавливаете неверную версию eRecovery (см. предыдущий ответ).

Вопрос: При установке приложения eRecovery система сообщает об ошибке «Not Acer System. «
Ответ: Не указаны некоторые параметры в БИОСе (модель, изготовитель компьютера и т.п.). Очень важно наличие Asset Tag — Acer. Для решения проблемы необходимо воспользоваться специальной утилитой dmitools.exe dmitools.exe . Программа работает под DOS, так что используйте загрузочный диск или другой носитель для возможности работы в этой среде.

Команды программы dmitools.exe:
[ /R | /WP | /WS | /WU ] [ STRING ]

[/R] : Read DMI Information from Memory
[/WM] : Write Manufacturer Name to EEPROM. (Max.= 16 characters)
[/WP] : Write Product Name to EEPROM. (Max.= 16 characters)
[/WS] : Write Serial Number to EEPROM (Max.= 22 characters)
[/WU] : Write UUID to EEPROM. (Ignore String )
[/WA] : Write Asset Tag to EEPROM. (Max.= 32 characters)

Например: dmitools /wa Acer System
dmitools /wm Acer
dmitools /wp Aspire 5730

Вопрос: Установка приложения eRecovery затягивается на неопределенно долгое время, система не «виснет» и приходится самостоятельно завершать работу приложения.
Ответ: Неверная структура жесткого диска. Если предустановлена Windows XP, то необходимо наличие трех разделов (1-й PQService, 2-й Acer — система, 3-й ACERDATA). Если предустановлена Windows Vista, то необходимо наличие или трех разделов (см. выше), или четырех (если имеется функция Instant-On-Arcade, которая позволяет запускать мультимедийное приложение без загрузки основной операционной системы). В последнем случае, первый и четвертый разделы — скрытые, остальные два — Acer и Data.

Вопрос: При установке приложения eRecovery версии 3.х.х появляется ошибка «eRecovery can not be installed — 1. Bootable File». Как быть?
Ответ: Эта ошибка означает, что в скрытом разделе отсутствуют файлы, необходимые для создания диска восстановления. Смонтируйте скрытый раздел и посмотрите наличие в корне раздела файла acerboot.iso.

Вопрос: При установке приложения eRecovery версии 3.х.х появляется ошибка «eRecovery can not be installed — 6. SoftwareDisc». Как быть?
Ответ: Необходимо создать папку C:\Acer\Preload\Autorun и скопировать в эту папку все файлы с диска Applications\Drivers, созданный предварительно с помощью приложения eRecovery.

Вопрос: При установке приложения eRecovery версии v6 (Windows 8) появляется ошибка «Для жесткого диска не установлена конфигурация по умолчанию». Как быть?

Некоторые версии eRecovery требуют наличия папки C:\OEM\Autorun\Preload для нормальной работы.

Все вопросы высказываем в этой теме форума: Технология Acer eRecovery и все что с ней связано

Материал подготовлен специально для http://acerfans.ru (автор – Гурьев Денис, GDenis )
e-mail guryev@rambler.ru
(изменение материала, копирование и распространение только с разрешения автора)

• Facebook
• Twitter
• Google+
• Вконтакте

• Создание дисков восстановления на ноутбуках, не имеющих CD\DVD-приводов
• Скрытый раздел для Windows 7 (версия NAPP 7.5.х.х) — редактирование образа предустановленной системы.
• Защита информации на ноутбуке и ПК
• Cкрытый раздел для предустановленной Windows Vista (создание, редактирование)
• Краткий FAQ по MBR (Основная Загрузочная Запись)
• Создание скрытого раздела для предустановленной Windows XP
• Быстрое восстановление системы
• Восстановление Windows
• Acer eRecovery. Полное описание
• Что нужно сделать после покупки ноутбука

Предыдущая 1 2 3 Следующая

Информация

Посетители, находящиеся в группе Гости, не могут оставлять комментарии к данной публикации.

• Чистка системы охлаждения ноутбука и замена термопасты на примере Acer Aspire 7738G
• FAQ по Acer eRecovery
• Обзор Просмотра событий операционной системы Windows 7
• Чистка системы охлаждения ноутбука
• Разгон видеокарты ноутбука
• Как установить Windows 8
• Эксплуатация аккумулятора ноутбука
• Компьютерные сети. Быстрая настройка сети для обмена файлами
• Компьютерные сети. Обжимка кабелей, настройка подключений и общий доступ к Интернету
• Компьютерные сети. Балансировка интернет-трафика между приложениями
• Руководство по разборке Acer Aspire One 721
• Компьютерные сети. Введение
• Замена процессора
• Linux и Windows на одном ноутбуке
• Путеводитель по разделу FAQ
• Превращаем встроенный Turbo Memory в носитель информации
• Решение проблемы с подтормаживаниями ноутбука
• Обзор ноутбука Acer Aspire Timeline 4410
• Восстановление информации на жестком диске и флешках
• Установка Windows 7 с флешки

• Драйвера для Acer Aspire One A110 и A150
• Драйвера для Acer V5-132P и V5-132
• Драйвера для Acer Aspire 5920, 5920G и 5920Z
• Драйвера для Acer Aspire Z5710
• Драйвера для Acer TravelMate 8473, 8473G, 8473T и 8473TG
• Драйвера для Acer Aspire 8951 и 8951G
• Драйвера для Packard Bell TS44
• Драйвера для Acer PH317-51
• Драйвера для Acer Aspire Z5610
• Драйвера для Acer B115-M и B115-MP
• Драйвера для Acer E5-772G и E5-772
• Драйвера для Acer TravelMate 5520 и 5520G
• Драйвера для Acer Extensa 2520 и 2520G
• Драйвера для Acer TravelMate 5530 и 5530G
• Драйвера для Acer TravelMate 8531
• Драйвера для Acer ES1-732
• Драйвера для Packard Bell TM83
• Драйвера для Acer E5-551 и E5-551G
• Драйвера для Acer S7-392
• Драйвера для Acer Extensa 2511 и 2511G

Перепечатка материалов и использование их в любой форме, в том числе и в электронных СМИ, возможны только при наличии обратной ссылки.
Поиск по сайтуКарта сайтаОбратная связь

5 Ways to Easily Fix All the Acer eRecovery Management Problems

You will learn the potential causes of Acer eRecovery Management problems and 5 solutions to fix them easily. And you can learn an overall solution to fix them once and for all.

By Clytze / Updated on October 26, 2022

Share this:
Table of Contents

1. Overview of Acer eRecovery Management
2. How to Fix Acer eRecovery Management Problems
   1. Fix Acer eRecovery Management Cannot Install Bootable File
   2. Fix Acer eRecovery Management Not Working
   3. Fix Acer eRecovery Management Cannot Select Restore Type
   4. Fix Acer eRecovery Hard Drive Configuration Is Not Set
   5. Fix Acer eRecovery Management Gets Stuck

   Overview of Acer eRecovery Management

   Acer eRecovery Management is a built in tool of Acer brand computers for Windows operating system backup and restoration. In default, there is already a hidden recovery partition on your system hard disk prepared for future usage when current OS fails due to some reason when you first get your machine. Thus, when an accident happens, you can immediately recover system back using Acer eRecovery Manager.

   

   However, sometimes, there may be some problems when you make use of Acer eRecovery Management to create recovery media or reset factory settings. Then, how to fix them and go on the restore process? Let’s see them one by one.

   How to Fix Acer eRecovery Management Problems

   Here you will learn the potential causes for Acer eRecovery Management Problems as well as corresponding solutions. In addition, you can learn an overall solution to fix them once and for all.

   Fix Acer eRecovery Management Cannot Install Bootable File

   Some users may not have Acer eRecovery application on their computers either by default or by accidental deletion. Thus, they have to install one before backup or restoration work. However, when they are trying to install it, they may failed with “eRecovery Can Not Be Installed 1. Bootable Files”.

   To solve this problem, you can follow the graphic tutorial below.

   When Acer Recovery Manager cannot install bootable file, if you want to make a system recovery image, just make use of Windows System Recovery under the Control Panel.

   Step 1. Enter “recovery drive” in the search box, and then choose “Create a recovery drive”.

   Step 2. In the next screen, ensure that the “Copy the recovery partition from the PC to the recovery drive” box is checked.

   

   Step 3. Plug in a USB flash drive which is large enough to contain the image file and select your USB Flash Drive as your recovery drive. Then click Next to continue.

   

   Step 4. Click “Create”. The recovery image and necessary recovery tools will be copied to your USB flash drive, which will take a while, depending on your PC and the size of the recovery image.

   Step 5. When it finishes, remove the USB flash drive. Keep it in a safe place and don’t use it to store other files or data.

   Fix Acer eRecovery Management Not Working

   Sometimes, eRecovery Management Acer may not working when you are in dire need of it to do factory recovery. This is an unpleasant thing. You cannot open it and it does not loading; even “Alt + F10” does not work.

   When such thing happens, you can check if the “D2D Recovery” option is enabled or not in BIOS. If not, enable it and try again. You can follow the steps below.

   Step 1. Boot your Acer computer and press F2 while it is booting to get into BIOS.

   Step 2. Navigate to the Main tab by using the arrow keys “→” or “←”.

   Step 3. Find the D2D Recovery (Disc-to-Disc Recovery), press Enter and then select “Enabled”.

   

   Step 4. Press F10 to save and exit. When you see the Acer logo, hold Alt and tap F10. The problem that Acer eRecovery Management not woring should now be solved.

   Fix Acer eRecovery Management Cannot Select Restore Type

   Sometimes, even if you are able to open Acer eRecovery software, you may not get to operate it smoothly. During restoring steps, it may stuck with a message saying that “acer erecovery management cannot select restore type”. Then, how to do?

   There have several possibilities:

   • The recovery discs may be damaged;
   • The original drive needs to be formatted or needs to be free partition;
   • AHCI in BIOS should be disabled;
   • RAM problem.

   Just find out the exact cause(s) and get rid of it or them.

   Fix Acer eRecovery Hard Drive Configuration Is Not Set

   In some situations, restore aborted due to acer erecovery hard drive configuration is not set. This may be caused also by several reasons:

   • There is no recovery discs or recovery partition;
   • The mode of SATA controller setting to AHCI is not correct;
   • Jumper numbers is not correct;
   • System disk partitions layout has been changed.

   Get a recovery disk from Acer directly

   If there is no recovery discs or recovery partition, you can purchase a set of recovery disks from Acer directly. Check in Accessories or the main web site.

   If you want to solve these situation mentioned above one by one and retry your attention. Learn more about Acer eRecovery hard drive configuration is not set in this article.

   Fix Acer eRecovery Management Gets Stuck

   Another common error is that Acer eRecovery Management gets stuck in the process of creating Acer recovery disk and restoring computer settings. Many users have reported that this software is often stuck at 0% or 99% while loading files. This situation may be caused by a corrupted drive or file. You can check hard drive integrity by running the CHKDSK command to fix the problem. Please follow the steps below.

   Step 1. Run Command Prompt as administrator on your computer.

   Step 2. Type chkdsk /f /r or chkdsk x /f /r (x stands for the drive letter). Then press Enter and wait for the process to accomplish.

   

   Step 3. Restart your computer and try using Acer eRecovery Management again. Check if the problem has been solved.

   Almighty Solution to Fix Acer eRecovery Management Problems (Alternative)

   In addition to these methods mentioned above, you can also choose an almighty solution to help you. As the best Acer eRecovery Management alternative — AOMEI OneKey Recovery allows you to create a system backup to a recovery partition. It can If something bad happens to your Acer computer, you can restore the system in time from the recovery partition to avoid data loss. It also has the advantages below.

   • Multiple computer brands: It applies to all brands computers instead of for one specific brand computer. Therefore, it supports not only Acer computers. You can also use it to run Samsung laptop recovery from boot, if you need.
   • Many paths: It allows you to backup the system to the recovery partition and other external devices, such as external hard drive, USB flash drive, CD/DVD, etc.
   • Protect the backup: It is able to compress or encrypt the backup image.
   • Schedule backup: You can backup the system regularly with fixed intervals such as daily, weekly or monthly.
   • Emergency key: Once you backed up system with this software, it will generate an emergency key to help you restore. It supports both F11 or A as the recovery key and boot menu at the system startup.

   You can follow the graphic tutorial below to create a system backup for Acer computer. If your computer has any problem you can use this backup to perform one key recovery.

   Step 1. Download this software install and launch it, click OneKey System Backup.

   Secure Download

   

   Step 2. Choose Backup system to AOMEI OneKey Recovery Partition and click Next. If you are worried about it will occupy a lot of disk space, you can choose the second method.

   

   Step 3. Select a partition on the hard drive to create a recovery partition and store the backup image. Then, click Start Backup.

   

   Summary

   This article introduces you 5 ways to solve Acer eRecovery Management problems. You can choose the corresponding solution according to the specific cause. Or you can choose a one-and-done method to solve all the problems. That is to use AOMEI OneKey Recovery to help you create a system backup. No matter what problems your computer has, you can use this system backup to restore. Even if your computer can’t boot up, you can still use the emergency key to do so. It can protect your data to the maximum extent.

   Clytze, an editor at AOMEI Technology, is passionate about safeguarding your digital world. She dedicates her expertise to empower users like you in data security and recovery. She firmly believes that everyone should have the tools and knowledge to protect their digital assets through computer backup, seamless disk cloning, and efficient file synchronization. Clytze is your trusted guide on the journey to data safety.

   Related Articles

   Acer Erecovery Management Stuck Solutions

   You will learn how to fix Acer eRecovery Management stuck problem in common situations and easily factory reset Acer without losing data.

   Acer eRecovery Management Windows 7 Introduction

   Acer eRecovery Management in Windows 7 is to help to backup operating system in case of accidents and restore system back after accident happens.

   Backup and Restore with Acer Recovery Management in Windows 10

   This article will show you how to backup and restore with Acer Recovery Management in Windows 10. With a backup in hand, you can restore Acer to a good state.

   How to Fix No Bootable Device Acer in Windows 11/10/7

   The startup issue: «no bootable device» or «no bootable devices found» error may happen on many laptops, such as Acer, HP, and other models. Don’t worry. EaseUS software will teach you the possible reasons and efficient solutions for no bootable device Acer in Windows 11/10/8/7.

   Note: This troubleshooting will provide a common guide for all Acer laptops, including Acer Nitro 5 and 7, Acer Aspire 3, 5, and E15. As an Acer user, you can find everything necessary to fix a bootable device.

   

   Acer computer says no bootable device found is a recurring problem. Here is a typical case:

   I’ve been getting the no bootable device message several times. First time I restarted a couple of times. I went into the BIOS the second time and set it to default settings. This is the third time, and I’ve done everything I did before but failed. This seems like a common problem. Does anyone have any suggestions? Thanks! — from Reddit

   Don’t worry about a similar problem. Continue reading for efficient solutions.

   What Caused No Bootable Device in Acer

   Before we enter the resolutions, it’s important to understand what no bootable device Acer mean. This error means when you boot your Acer laptop, the Acer computer cannot detect the bootable drivers to load the operating system.

   Causes of no bootable device Acer:

   • Boot order is incorrect.
   • MBR (Master Boot Record) is corrupted.
   • Hard drive is failed or damaged.
   • Boot partition is not set as active.
   • Boot partition is lost.
   • Operating system file is damaged.

   And some other unknown reasons may also cause the boot device not found error. Next, we will provide some efficient solutions to boot Windows successfully.

   ��Extend Reading: Dell no bootable devices found, How to Boot Acer Laptop From USB

   How to Fix No Bootable Device Acer in Windows — 9 Efficient Ways

   This guide will provide nine workable solutions to fix the «no bootable device Acer» on Windows 11/10/8/7:

   Solutions	Effectiveness	Difficulty
   Disconnect External Peripherals	High — If it is a hard disk problem, this method can successfully solve the problem.	⭐
   Check Hard Disk Connection	High — Replacing the cable can directly resolve the error associated with it.	⭐
   Set the Bootable Hard Disk Order	High — Modifying the boot order can solve the problem by setting the bootable disk as the first boot item.	⭐⭐⭐
   Repair Damaged MBR	High — A corrupted MBR file is the most probable reason for the computer not booting up.	⭐⭐
   Set the Primary Partition As Active	Medium — The active partition can only be set using the command prompt line in the BIOS.	⭐⭐⭐
   Fix File System on Bootable Drive	Medium — there are several cases of disk errors. The program supports checking only one situation.	⭐⭐⭐⭐
   Repair Corrupt Boot Files	Medium — Repairing corrupted boot files requires proficiency in commands. Command errors can easily lead to data loss.	⭐⭐⭐⭐
   Recover Lost Boot Partitions	Medium — this scenario is used only in case of boot partition loss.	⭐
   Resolve Bootable Device Errors with Windows Repair Service	High — EaseUS experts will provide you with specialized advanced support and services.	⭐

   If these solutions help solve the bootable device error, you can share this tutorial with friends. And then, we will begin the step-by-step guide.

   Fix 1. Disconnect External Peripherals

   Some users have reported that connecting USB peripheral devices to the computer may trigger the «No Boot Device» issue. By re-inserting the peripherals one by one, you can find the cause of the Acer computer’s «No Boot Device» problem and replace it with a new one.

   • Press and hold the power button and turn off your computer.
   • Unplug all peripheral devices, such as USB keyboards and mice.
   • Restart your computer to see if the peripherals are the cause.

   Fix 2. Check Hard Disk Connection

   Incorrect connection of components may also cause the bootable hard disk to be undetected during Windows startup. Check for loose cables:

   • Power off the computer and open the computer case.
   • Check that the SATA cable is securely or correctly connected to the motherboard and the hard disk.
   • Restart the computer.

   Fix 3. Set the Bootable Hard Disk Order

   Suppose you have an unbootable disk inserted in your Acer computer, or you have not set the bootable disk as the first startup item. In that case, you may experience problems with Windows not booting the Acer device. To ensure your computer boots smoothly, change the boot order and set the disk with the operating system loaded as the boot device.

   Step 1. Reboot your computer and press F10 repeatedly to enter the BIOS setup menu.

   Step 2. Open the Boot menu and use «+» or «-» to move the hard disk.

   Step 3. Press F10 to save the changes to the boot sequence and exit.

   

   Step 4. Reboot the computer.

   Fix 4. Repair Damaged MBR

   The MBR serves as the hard disk’s boot sector, which contains important information about the hard disk’s partitions and loads the operating system. The MBR can become corrupted due to viruses or bad sectors. You cannot boot Windows and receive Acer no bootable device error.

   You can easily repair a corrupted MBR using EaseUS Partition Master, an advanced disk management tool. This software allows you to easily create bootable USB drives and rebuild MBR in a WinPE environment.

   Windows 11/10/8/7 100% Secure

   You can easily fix Acer boot errors without any specialized skills. Detailed step-by-step instructions are given below:

   Step 1. Create a WinPE bootable disk

   • Launch EaseUS Partition Master, and click «Bootable Media» on the toolbar. Select «Create bootable media».
   • Click «Next» to finish the process.

   

   Step 2. Boot EaseUS Partition Master Bootable USB

   • Connect the bootable USB or CD/DVD to your PC.
   • Press F2 or Del when you restart the computer to enter the BIOS screen. Set and boot your computer from «Removable Devices» or «CD-ROM Drive». And then EaseUS Partition Master will run automatically.

   Step 3. Rebuild MBR

   • Click «Toolkit» and choose «Rebuild MBR».

   

   • Select the disk and the type of MBR. Then, click «Rebuild».

   

   • After that, you can see «MBR has been successfully rebuilt on Disk X».

   

   Other problems that EaseUS Partition Master can deal with:

   Fix 5. Set the Primary Partition As Active

   Acer will also fail to boot the device when the primary partition is not «active.» You need to boot the computer using the Windows installation media. Then use Diskpart to set the primary partition.

   Step 1. Create a Windows installation disk and boot your computer system from it.

   Step 2. Select the language and region and click «repair your computer.»

   Step 3. Open command prompt:

   For Windows 10/8: Select «Troubleshooting» and then «Command Prompt.»

   

   For Windows 7: Select Windows 7 as the operating system under «System Recovery Options,» click «Next,» and then «Command Prompt.» «Click Next, and then click Command Prompt.

   

   Step 4. Enter each of the following commands in turn.:

   Step 5. Restart the computer after closing the command prompt.

   Fix 6. Fix File System on Bootable Drive

   Corruption in the file system of the boot disk can also cause the hard disk will not boot properly. You can try to repair the corrupted file system using the CHKDSK command.

   Step 1. Access the command prompt by starting your computer from the above Windows installation disk.

   Step 2. Enter the following command:

   chkdsk E: /f /r /x («E» indicates the disk letter of the partition to be repaired)

   

   Fix 7. Repair Corrupt Boot Files

   Corrupt startup files on Acer computers can also cause errors. You can run the SFC/DISM command to check and repair the corrupted system files.

   Use the Windows Installation CD to start the command prompt and enter the following command:

   sfc /scannow /offbootdir=c: /offwindir=c:windows

   If this command does not resolve the problem, try using a DISM scan:

   DISM /Online /Cleanup-Image /RestoreHealth

   If this does not work, keep trying:

   Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows

   Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

   Fix 8. Recover Lost Boot Partitions

   Acer no bootable device error may also occur if your system partition has been accidentally deleted. If you have created a bootable USB with EaseUS Partition Master in Fix 4, you can use the tool to recover the lost partition successfully.

   Windows 11/10/8/7 100% Secure

   Step 1. Open EaseUS Partition Master and click «Partition Recovery». Select the target disk with your lost partition and click «New Scan».

   

   Step 2. Wait patiently to let the software execute «Quick Scan» and «Full Scan» operation. It will mark your deleted partition as «lost» as the Status section. Select the lost partition, and click «Recover».

   

   You can also double click on the partition you’re looking for to preview its content and click «OK» to confirm.

   

   Step 3. Wait patiently and click «Done» when the partition recovery process completes.

   

   Fix 9. Resolve Bootable Device Errors with Windows Repair Service

   If none of the above methods solves the no bootable device Acer problem, you can use the remote services of EaseUS. EaseUS specializes in providing more professional services for computer problems. Click the link below to get in touch with our team of experts:

   EaseUS Premium Support & Serivce

   You can also hit on a 1 for 1 service for fixing multiple boot issues on your current PC, including:

   • BSOD: Blue Screen of Death, Black Screen of Death, Green Screen and even Red Screen on Windows.
   • PC Unbootable: Cloned disk unbootable, computer unbootable after dissimilar recovery, clone disk unbootable on a new PC.
   • Error Codes: 0XC000000E, 0XC0000225, Inaccessible_boot_device, Operating System not found or missing, etc.

   Contact us for fixing your issues now:

   24/7 Tech Live Chat

   Conclusion

   We’ve discussed all the efficient solutions in this guide for no bootable device Acer problem. And you should be able to deal with the related issues. You can try some basic fixes, such as disconnecting all USB peripherals and checking cables. If this doesn’t work, try advanced BIOS solutions, such as changing boot orders, repairing MBR, etc.

   And we also provided some similar articles to today’s topic. Click the buttons and learn more:

   FAQs About No Bootable Device Acer

   For further questions about the bootable device Acer, check the following answers:

   1. What should I do when my laptop says no bootable device?

   When you meet the no bootable device on your laptop, check the cable, external devices, and BIOS settings first. This can help you inspect the fundamental reasons that caused the error. Then, go to Advanced Options and use Command Prompt or other solutions to fix more errors.

   2. How to fix the bootable device that happens on Acer Aspire 5?

   This troubleshooting provided some shared solutions for all Acer laptops. You can apply the solutions to any PC that meets the bootable devices error, including:

   • Fix damaged MBR
   • Set primary partition as active
   • Change boot order
   • Run SFC command

   And you can check more detailed solutions on this page.

   3. How to get into the BIOS on Acer?

   Acer provides some keys for you to enter the BIOS. Here are the steps:

   Step 1. Press the power key to start up the PC.

   Step 2. When the first logo screen appears, press F2 to enter the BIOS.

   Похожие публикации:

   1. Unreal development kit что это
   2. Базис мебельщик как изменить размер детали
   3. Как подключить моноблок к компьютеру
   4. Что за безопасный режим на андроиде