Locate simple file system protocol failly asus что делать

Locate simple file system protocol failly asus что делать

Сообщения: 1077
Благодарности: 94

Конфигурация компьютера
Процессор: Intel core 2 quad q9300
Материнская плата: Gigabyte ga-ep45-ud3lr
Память: Kingston 800 mhz 4gb 2×2
HDD: WDC WD2500AAKX-001CA0, ST3320613AS
Видеокарта: Zotac geforce 550 ti
Звук: Realtek ALC888
Блок питания: chieftec APS-550S
CD/DVD: asus какой то выключен
Монитор: Benq GL2440 24 дюйм
ОС: windows 7 ultimate x86
Индекс производительности Windows: 5.9

Автор: Lonely_Mouse
Дата: 22-01-2016

Привет, ребят. Принесли ноут, стояла 8, не загружалась. Вынул жесткий, смарт показал немного переназначенных секторов и кучу udma crc error. В очереди переназначения не было, виктория ошибок не показала, ну, думаю ладно, поставлю 7. Переразметил в мбр, расчехлил свою сборку из wim образа, вставляю, не видит. Флешки тоже не видит. Csm включал, толку нет. Пробовал флешку в uefi сделать через rufus, безрезультатно. Решил биос прошить, жмякаю start easy flash, выдает Locate Simlpe File System protocol failly! На уме только попробовать как-то восстановить 8, но я в этом efi ни в зуб ногой

Linux Mint Forums

Forum rules
Before you post read how to get help. Topics in this forum are automatically closed 6 months after creation.

4 posts • Page 1 of 1
Joe2Shoe Level 5
Posts: 840 Joined: Wed Oct 18, 2017 8:12 pm Location: Ozone

ASUS-PRO P450CA-XH51

Post by Joe2Shoe » Sun Mar 04, 2018 7:55 pm

A friend just gave me an ASUS-PRO P450CA-XH51 laptop in pristine condition, with Windows 10 Pro 64-bit.
Intel i5 3337U 1.80GHz CPU, 6GB RAM, Crucial 250GB SSD, Intel(R) HD Graphics 4000.
Has anyone here installed LM MATE or Cinnamon 18.3 64-bit onto one of these machines?
I just can’t stand Windows. period.
I will boot-up a LM MATE 18.3 64-bit Live USB and give it a whirl.

Many thanks for all assistance.

Last edited by LockBot on Wed Dec 28, 2022 7:16 am, edited 1 time in total.
Reason: Topic automatically closed 6 months after creation. New replies are no longer allowed.

«Tolerance is the refuge of men without conviction.»
«Common sense is not so common» — Voltaire

AZgl1800 Level 20
Posts: 10577 Joined: Thu Dec 31, 2015 3:20 am Location: Oklahoma where the wind comes Sweeping down the Plains Contact:

Re: ASUS-PRO P450CA-XH51

Post by AZgl1800 » Sun Mar 04, 2018 8:23 pm

oh yes, that is going to be a screamer!

power on to desktop in about 10 seconds.

I am typing on an ASUS TP500L and it runs 18.3 Cinnamon with only 4 gB of RAM and it don’t even blink.

inxi -Fxz System: Host: john-TP500LA Kernel: 4.13.0-36-generic x86_64 (64 bit gcc: 5.4.0) Desktop: Cinnamon 3.6.7 (Gtk 3.18.9-1ubuntu3.3) Distro: Linux Mint 18.3 Sylvia Machine: System: ASUSTeK (portable) product: TP500LA v: 1.0 Mobo: ASUSTeK model: TP500LA v: 1.0 Bios: American Megatrends v: TP500LA.203 date: 06/11/2014 CPU: Dual core Intel Core i3-4030U (-HT-MCP-) cache: 3072 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7582 clock speeds: max: 1800 MHz 1: 1895 MHz 2: 1895 MHz 3: 1895 MHz 4: 1895 MHz Graphics: Card: Intel Haswell-ULT Integrated Graphics Controller bus-ID: 00:02.0 Display Server: X.Org 1.18.4 drivers: (unloaded: fbdev,vesa) Resolution: 1366x768@60.01hz GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 17.2.4 Direct Rendering: Yes Audio: Card-1 Intel 8 Series HD Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 Card-2 Intel Haswell-ULT HD Audio Controller driver: snd_hda_intel bus-ID: 00:03.0 Sound: Advanced Linux Sound Architecture v: k4.13.0-36-generic Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169 v: 2.3LK-NAPI port: e000 bus-ID: 02:00.1 IF: enp2s0f1 state: down mac: Card-2: MEDIATEK MT7630e 802.11bgn Wireless Network Adapter driver: mt7630e v: 2.3.8 2.3.8 2.3.8 2.3.8 2.3.8 2.3.8 bus-ID: 03:00.0 IF: wlp3s0f0 state: up mac: Drives: HDD Total Size: 500.1GB (27.3% used) ID-1: /dev/sda model: TOSHIBA_MQ01ABF0 size: 500.1GB Partition: ID-1: / size: 455G used: 124G (29%) fs: ext4 dev: /dev/sda1 ID-2: swap-1 size: 4.17GB used: 0.00GB (0%) fs: swap dev: /dev/sda5 RAID: No RAID devices: /proc/mdstat, md_mod kernel module present Sensors: System Temperatures: cpu: 42.0C mobo: N/A Fan Speeds (in rpm): cpu: 2700 Info: Processes: 195 Uptime: 4:08 Memory: 1129.7/3829.2MB Init: systemd runlevel: 5 Gcc sys: 5.4.0 Client: Shell (bash 4.3.481) inxi: 2.2.35 

LM21.2 Cinnamon ASUS FX705GM | Donate to Mint https://www.patreon.com/linux_mint
KeePassXC

What is the simple file system protocol failly

My laptop is asking me to locate the simple file system protocol failly. were can I locate this?

Posted by Anonymous on May 02, 2014

• Print this page
• Share this page

You can’t post conmments that contain an email address.

Add Your Answer

Tips for a great answer:

• — Answer the question.
• — If you need clarification, ask it in the comment box above.
• — Better answers use proper spelling and grammar.
• — Provide details, support with references or personal experience.

Tell us some more! Your answer needs to include more details to help people. You can’t post answers that contain an email address. Please enter a valid email address. The email address entered is already associated to an account.Login to post Please use English characters only.

Tip: The max point reward for answering a question is 15.

Upload an image from your computer

Draw a box over the problem!!

Edit

Close Save changes

Attachments: Added items

Uploading: 0%

my-video-file.mp4

Complete. Click «Add» to insert your video. Add

Loading.
Include an image. It’s worth a thousand words.

Related Questions:

HP1006su.ent

For windows xp this worked for me. Try to locate the file yourself at «C:\Program Files\Hp\HP LaserJet P1000_P1500 Series\English». After that the installation asked one more think located at «C:\Program Files\Hp\HP LaserJet P1000_P1500 Series». That simple.

May 11, 2014 • HP LASERJET P1005 Printer

How to Setup Linux Mail Server

Email is an important part of any Web site that you create. In a home environment, a free web based email service may be sufficient, but if you are running a business, then a dedicated mail server will be required. A mail server is an application that receives incoming e-mail from local users (people within the same domain) and remote senders and forwards outgoing e-mail for delivery, as example Microsoft Exchange, Gmail, etc. The system uses SMTP (Simple Mail Transfer Protocol) or ESMTP (extended SMTP) for sending e-mail, and either POP3 (Post Office Protocol 3) or IMAP (Internet Message Access Protocol) for receiving e-mail. In windows forum most of workstations are use Microsoft Exchange server or outlook express. In Linux forum there have also an easiest option to send and receive mail. In Linux configuration of mail server is easy flexible too.

In most of Linux workstation RedHat Linux are used for their Server. In RedHat Linux we use sendmail to create a mail server that will relay your mail to a remote user’s mailbox or incoming mail to a local mail box. On our RedHat we will find sendmail’s configuration file as /etc/sendmail.cf. If you download and compile sendmail you would find it in /etc/mail/sendmail.cf. To configure sendmail you have basically 2 options. Either you edit the sendmail.cf file directly or you create the sendmail.cf from an m4 file such as sendmail.mc. Here to explain the process I will list the steps to produce a custom sendmail.mc file.

SendMail Configuration: In Redhat Linux dovecot and sendmail packages are used as service demon for Mail server. At first I install the available sendmail RPM package by YUM and also the dovecot RPM. After installation first I have edit the sendmail .mc file. After installation of sendmail package it locates as sendmail.mc in /etc/mail. In the sendmail.mc file I have find the line DAEMON_OPTION and edit it with # before the line to uncheck it. Then I find Local Domain and edit it also with the system FQDN. After editing save the sendmail.mc file. After exiting from sendmail.mc I moved this .mc file to sendmail.cf with m4. Here the SendMail configuration is complete. Then I go to the /etc/dovecot.conf file and edit it. I just find the protocol line and uncheck this line. After that I save this .conf file. After all configurations I have start the service demons with chkconfig command and restart the both services. And the mail server was going on swiftly.

So it is very easiest job to configure a mail server in RedHat Linux enterprise server.

on Mar 21, 2011 • Computers & Internet

2014 jeep grand cherokee uconnect system

the system does have limits. (learn them)
ask your dealer,
Many of these cars have updates. to correct errors like this.
keep you stick simple and it will work, cars computers are really
dumb compared to a real computer,with a real file system.
simple files
simple names.
and not too many folders.
and win.

Mar 14, 2014 • 2014 Jeep Grand Cherokee

Quelques touche du clavier ne fonctionnent plus

Le clavier lui-meme a failli. Tu dois le remplacer.
Le clavier http://www.getpartsonline.com/378188-001.html
Procedure pour remplacement http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02045773

May 04, 2011 • HP Compaq nc6220 Notebook

I need a back up from windows XP Home Edition

How To Buckup Winxp Unknown to many users, Windows XP offers a simple and easy to use program made specifically to backup your system files. The program can be found by clicking the «Start» button, and navigating through the following menu items; Programs, Accessories, and System Tools.
The program is entitled backup, however do not let the lame title fool you, as the software is both simple to use and very powerful. It is very simple to use, because you only have to specify where you would like the backup file to be stored; there are no challenging questions asked. It is very powerful because it enables you to create a single file that is a complete backup of your entire system.
Once you open the program, you will be greeted with a window containing the backup & restore wizard. After reading the window, you may click on the next button, and you will be greeted with two options; Backup files & settings and Restore files & settings.
After you select «backup files & settings» and click the OK button, you will be greeted with a list of items that you can backup. Because the purpose of this article is to explain to you how to backup your system files, select the option «All information on this computer» and click the next button.
How to successfully make a backup copy of your entire system.You will then be asked for a location to store the *.bak file. Since Windows XP is extremely large, storing the *.bak file on floppy disks is not feasible, as it would take several hundreds, if not thousands of floppy disks to hold the file.
Instead store the file locally on your hard drive. Once the file has been created, you will be prompted to insert a floppy disk. The software will then write a program to the disk that allow you to boot the system using the disk, and restore your system via the *.bak file.
Please remember that the backup file can be extremely large, and requires you to either place it onto a CD, DVD, or in a well protected folder or partition on your computer system.
How to easily restore your backup files.If you ever have the need to utilize the backup file, simply place the floppy disk in your drive, and turn on the computer. The system will boot from the floppy, and ask for the location of the *.bak file. Once you provide the system with the location of the backup file, your system will begin to replace your corrupt system files with your backup files.

Feb 02, 2011 • Microsoft Windows XP Home Edition

I can recieve emails but cant send IT COMES UP ERROR ID 0x80070057

Telephone your ISP (Internet Service Provider) and ask for Technical Support.
Get them to check the «outbound» SMTP (Simple Mail Transfer Protocol) settings,
to make sure that you are using the settings recommended/required by the ISP.

Nov 30, 2010 • Microsoft Windows XP Professional

How to configer email address in lotus notes

From what provider are you trying to configure email?If its gmail,

1. Create a Lotus Notes database file to store your POP emails: Lotus Notes does not create a file automatically as Thunderbird or other mail clients do but you have to manually point the mails to flow to a file that is already existing.
2. In the local Address Book, create two accounts for accepting incoming email and sending outgoing email on Gmail. Names are not important but the configuration on the two accounts is!
Account document for Incoming Gmail:
The Basics tab
a. Account name: Can be anything (I chose In Gmail)
b. Account server: pop.gmail.com
c. Login Name: Your gmail email address (complete with the @gmail.com)
d. Password: Your password
e. Protocol: POP
f. SSL: Enabled
g. Only from Location(s): Doesn’t matter. Although I would recommend creating a location document specific for Gmail if you are also using Domino Server. I chose creating a location (Gmail).
Protocol Configuration tab: There is only one field here and it doesn’t matter what you do with it.
Advanced Tab: This is the most important tab.
a. Port Number: 995
b. Accept SSL site certificates: Yes (Most of the articles on the web tell you to choose No here. But it does work. Trust me. I have tried it)
c. Accept expired SSL certificates: Yes. (Most of the articles on the web tell you to choose No here. But it does work. Trust me. I have tried it)
d. Send SSL certificates when asked (outbound connections only): No.
e. Verify account server name with remote server’s certificate: Disabled
f. SSL protocol version: V3.0 with V2.0 handshake
3. Click on Save and Close to save the document and exit. Now you will need to create another account document to handle the outgoing email.
Account document for Outgoing Gmail:
The Basics Tab
a. Account Name: Can be anything. I chose Out Gmail
b. Account server name: smtp.gmail.com
c. Login Name: Your gmail email address (complete with the @gmail.com)
d. Password: Your password
e. Protocol: SMTP
f. SSL: Enabled
g. Only from Location(s): Doesn’t matter. Although I would recommend creating a location document specific for Gmail if you are also using Domino Server. I chose creating a location (Gmail).
Advanced Tab: This is the most important tab.
a. Port Number: 587 or 465 (Both are SSL port and both work)
b. Accept SSL site certificates: Yes (Most of the articles on the web tell you to choose No here. But it does work. Trust me. I have tried it)
c. Accept expired SSL certificates: Yes. (Most of the articles on the web tell you to choose No here. But it does work. Trust me. I have tried it)
d. Send SSL certificates when asked (outbound connections only): No.
e. Verify account server name with remote server’s certificate: Disabled
f. SSL protocol version: V3.0 with V2.0 handshake
4. Once these two documents are created, I would recommend creating a location document to ensure that you separate your gmail from your other Domino based account on the client. The steps to create are:
5. In the same local Address Book, choose New —> Location
Basics Tab:
a. Location Type: Local Area Network
b. Location Name: Can be anything (I chose Gmail)
c. Internet Mail Address: Your gmail email address
Leave the rest as it is.
Servers Tab:
a. Home/Mail server: pop.gmail.com
Leave the rest as it is.
Ports tab: No changes (ensure TCPIP is checked)
Mail Tab (Most important):
a. Mail file location: Local
b. Mail file: My Gmail.nsf (whatever you created in step 1 above).
Update: A couple of readers pointed out that I had missed an important step in the configuration how-to. So here it is. Step C has been added to include the missed step.
c. Internet domain for Notes addresses when connecting directly to the Internet: gmail.com
d. Send Outgoing mail: directly to Internet
Leave the rest of the fields as it is.
6. There is no need to change the rest of tabs. Click on Save and Close to create the document.
Change to the the new location and you will see Gmail getting downloaded in the mail file you created.

Thread: Asus X205TA hardware support in Ubuntu

Just Give Me the Beans!

Join Date Nov 2008 Beans 55 —> Beans 55

Asus X205TA hardware support in Ubuntu

I followed the instructions here: https://github.com/lopaka/instructio. asus-x205ta.md and have created a bootable USB stick with Ubuntu 14.10 that works on the Asus x205ta. Much of it is working — desktop, basic mouse functions, proper screen resolution.

However, there are lots of problems with the hardware:-

• Hot keys do not work, apart from volume up / down / mute. In Ubuntu MATE Linux, there is an Asus Laptop keyboard type but selecting it has no effect.
• Suspend doesn’t appear to be working. It just turns the screen off.
• The internal Broadcom wifi card is not recognised.
• Bluetooth card not recognised.
• Sound card not recognised.
• No battery status available. The system thinks it is plugged into the mains.
• The Micro SD card reader doesn’t work. Cards are not recognised or mounted.
• The trackpad does not support anything more than pointer positioning and right / left clicks. No multi touch (for example, two finger scrolling).
• An external wifi card (EdiMax) will work, but is flaky; times out.

I am sure there are other problems and I know there is another thread that talks about running 14.04 on the X205TA.

I ran the utilities requested in that other thread and the output is here.

Output of ‘sudo lspci -knn’

ubuntu description: Notebook product: X205TA (ASUS-NotebookSKU) vendor: ASUSTeK COMPUTER INC. version: 1.0 serial: XXXXXXXXXXXXXXXXX width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook family=X sku=ASUS-NotebookSKU uuid=060B9F3C-618E-4E09-AD6E-325920EEB823 *-core description: Motherboard product: X205TA vendor: ASUSTeK COMPUTER INC. physical id: 0 version: 1.0 serial: XXXXXXXXXXXXX slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: X205TA.205 date: 10/06/2014 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int14serial int17printer acpi usb smartbattery biosbootspecification uefi *-memory description: System Memory physical id: b slot: System board or motherboard size: 2GiB *-bank description: DIMM DDR3 1333 MHz (0.8 ns) product: Array1_PartNumber0 vendor: A1_Manufacturer0 physical id: 0 serial: A1_SerNum0 slot: A1_DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-cache:0 description: L1 cache physical id: 10 slot: CPU Internal L1 size: 224KiB capacity: 224KiB capabilities: internal write-back *-cache:1 description: L2 cache physical id: 11 slot: CPU Internal L2 size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-cpu description: CPU product: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz vendor: Intel Corp. physical id: 12 bus info: cpu@0 version: Intel(R) Atom(TM) CPU Z3735F @ 1.33GHz slot: SOCKET 0 size: 1330MHz capacity: 2400MHz width: 64 bits clock: 83MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4 *-pci description: Host bridge product: Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 0f width: 32 bits clock: 33MHz configuration: driver=iosf_mbi_pci resources: irq:0 *-display description: VGA compatible controller product: Atom Processor Z36xxx/Z37xxx Series Graphics & Display vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 0f width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:105 memory:90000000-903fffff memory:80000000-8fffffff ioport:1000(size=8) *-usb description: USB controller product: Atom Processor Z36xxx/Z37xxx Series USB xHCI vendor: Intel Corporation physical id: 14 bus info: pci@0000:00:14.0 version: 0f width: 64 bits clock: 33MHz capabilities: pm msi xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:104 memory:90800000-9080ffff *-generic description: Encryption controller product: Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 0f width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei_txe latency=0 resources: irq:106 memory:90700000-907fffff memory:90600000-906fffff *-isa description: ISA bridge product: Atom Processor Z36xxx/Z37xxx Series Power Control Unit vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 0f width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-scsi physical id: 1 bus info: usb@1:2.1 logical name: scsi0 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda size: 1937MiB (2031MB) capabilities: gpt-1.00 partitioned partitioned:gpt configuration: guid=e8412333-63a1-4ab4-9764-8c9e837c422f sectorsize=512 *-volume description: Windows FAT volume vendor: mkfs.fat physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /cdrom version: FAT32 serial: 9901-bf29 size: 1934MiB capacity: 1935MiB capabilities: boot fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-network description: Wireless interface physical id: 1 bus info: usb@1:2.2 logical name: wlan0 serial: 80:1f:02:60:f8:07 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rtl8192cu driverversion=3.16.0-23-generic firmware=N/A ip=10.0.1.42 link=yes multicast=yes wireless=IEEE 802.11bgn

Output of ‘lspci’:

00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0f) Subsystem: ASUSTeK Computer Inc. Device [1043:18cd] Kernel driver in use: iosf_mbi_pci 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0f) Subsystem: ASUSTeK Computer Inc. Device [1043:18cd] Kernel driver in use: i915 00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 0f) Subsystem: ASUSTeK Computer Inc. Device [1043:182d] Kernel driver in use: xhci_hcd 00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0f) Subsystem: ASUSTeK Computer Inc. Device [1043:182d] Kernel driver in use: mei_txe 00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0f) Subsystem: ASUSTeK Computer Inc. Device [1043:182d] Kernel driver in use: lpc_ich

Output of ‘lsusb’:

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS] Bus 001 Device 004: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 002: ID 0bda:57b5 Realtek Semiconductor Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

The Edimax card is an external USB micro wifi card. I think the Realtek device is the sound card.

How can this be progressed? It’s a great machine otherwise, and (reportedly) on sale for only $99 in Staples for Black Friday (2014). You lucky Americans get all the best deals — I think there are going to be an awful lot of people buying them.